Navigation

   Main Page

LPT_Switch

   Download
   Registration
   Screenshots
   FAQ
   Contact Us
 
   LPT_Switch v.2.3
According to the scheme (Help - Fig. 1.0) program can enable / disable from 1 to 12 electrical appliances (external device), to read the status of 5 hardware sensors, to use the data files f1 and f2 as sensors. External device using a 12 blocks control external devices (BCED, Help - Fig. 1.1) are connected to the pins of the LPT.
Devices can be managed by the following main ways:
- manually;
- using the five sensors;
- the contents of two text files f1 and f2; timer (schedule); from any computer of the local network, if you have installed the application LPTS_Client;
- remotely using the phone keypad, if the computer where you installed the program LPT_Switch have a 'voice' modem.
After starting the program reads a configuration file of the selected profile (LPT_Switch.ini default) and window elements accept user-defined properties and status.
The lower part of the window, Options, where are all custom settings and properties of the program, and can be displayed or hidden by the green arrow on the display panel. To remember (entry in the ini file) changed settings are used, click Apply or OK. When OK is pressed, the lower part of the Options window becomes invisible, minimized.
    

Download